12Chorus Type

Selects either chorus or delay.

Value

0 (Off): Neither chorus or delay is used.

1 (Chorus): Chorus is used.

2 (Delay): Delay is used.

3 (GM2 Chorus): General MIDI 2 chorus

13Chorus Output Select

Specifies how the sound routed through chorus will be output.

Value

MAIN: Output to the OUTPUT jacks in stereo.

REV: Output to reverb in mono.

M+R: Output to the OUTPUT jacks in stereo, and to reverb in mono.

When set to “MAIN” or “M+R,” the OUTPUT jack from which the sound is output is set in Chorus Output Assign ( 15 ).

14Chorus Level

Adjusts the volume of the sound that has passed through chorus. Value: 0–127

15Chorus Output Assign

Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select ( 13 ) is set to “MAIN” or “M+R.”

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

When Chorus Output Select ( 13 ) is set to “REV,” this setting will have no effect.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

16Reverb Type

Selects the type of reverb.

Value

0 (Off): Reverb is not used.

1 (Reverb): Normal reverb

2 (SRV Room): This reverb simulates typical room acoustic

reflections.

3 (SRV Hall): This reverb simulates typical concert hall acoustic

reflections.

4 (SRV Plate): This reverb simulates a reverb plate, a popular type of artificial reverb unit that derives its sound from the vibration of a metallic plate. You can also achieve unusual metallic-sounding reverbs using “SRV Plate.”

5 (GM2 Reverb): General MIDI 2 reverb

Adding Effects

17Reverb Level

Adjusts the volume of the sound that has passed through reverb. Value: 0–127

18Reverb Output Assign

Specifies how the sound routed through reverb will be output.

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

19MFX-A Source (Multi-Effects A Source)

When a performance is selected

Selects the multi-effects parameter settings that will be used by the performance. If you wish to use the performance settings, select “PRF.” If you wish to use the settings of the patch/rhythm set assigned to one of the parts, select the part number.

Value: PRF, P1–P16

When a multitimbre is selected

Selects the multi-effects parameter settings that will be used by the multitimbre. If you wish to use the multitimbre settings, select “MLT.” If you wish to use the settings of the patch/rhythm set assigned to one of the parts, select the part number.

Value: MLT, P1–P16

When the MFX-A Source parameter is set to “P1” – “P16,” MFX- B and MFX-C will be disabled.

When Patch or Rhythm Set Settings Are Selected

When the patch or rhythm set’s multi-effects settings are

 

selected, those settings are shown in each of the multitimbre’s/

 

performance’s multi-effects setting screens, and the settings can

Effects

rhythm set is selected. To keep the modified settings, save the

be then be changed as well. Changes to patch or rhythm set

 

multi-effects parameter settings are lost when another patch or

 

patch/rhythm set settings (p. 93, p. 114).

Adding

 

173

Page 173
Image 173
Roland Piano owner manual 173, MFX-A Source Multi-Effects a Source, When Patch or Rhythm Set Settings Are Selected