Roland Piano owner manual 172

Adding Effects

1Part Select

Select the part for which you want to make settings. Value: 1–16

2Part Output Assign

Specifies for each part how the direct sound will be output.

Value

MFX: Output in stereo through multi-effects. You can also apply chorus or reverb to the sound that passes through multi-effects. A, B: Output to the OUTPUT A (MIX) jack or OUTPUT B jack in stereo without passing through multi-effects.

1–4:Output to the INDIVIDUAL 1–4 jacks in mono without passing through multi-effects.

PAT: The part’s output destination is determined by the settings of the patch or rhythm set assigned to the part.

When the settings are such that signals are split and output from the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is inserted in the INDIVIDUAL 2 jack, the sounds from INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then output from the INDIVIDUAL 1 jack. This sound comprises the sounds from the INDIVIDUAL 1 and 2 jacks.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

•When setting the “MFX,” set the output destination with the MFX Output Assign ( 11 ) for the sound after it has passed through the multi-effects.

•Chorus and reverb are output in mono at all times.

•The output destination of the signal after passing through the chorus is set with the Chorus Output Select ( 13 ) and the Chorus Output Assign ( 15 ).

•The output destination of the signal after passing through the reverb is set with the reverb Output Assign ( 18 ).

3Part Output MFX Select (Part Output Multi- Effects Select)

Of the three types of multi-effects that can be used simultaneously, specify which multi-effects will be used.

Value: A–C (MFX-A–MFX-C)

4Part Dry Send Level

Set the level of the signal that is sent to the output destination specified by Part Output Assign ( 2 ).

Value: 0–127

5Part Chorus Send Level

Sets the level of the signal sent to chorus for each part. Value: 0–127

6Part Reverb Send Level

Sets the level of the signal sent to reverb for each part. Value: 0–127

For the following parameters 7 – 11 , settings can be made individually for each multi-effects (MFX1–MFX3) selected in Part Output MFX Select ( 3 ).

7MFX Type (Multi-Effects Type)

Use this parameter to select from among the 90 available multi- effects. For details on multi-effects parameters, refer to “Multi- Effects Parameters” (Sound/Parameter List).

Value: 0 (Through)–90

Depending on the multi-effects you select here, it may not be possible to use three multi-effects simultaneously.

8MFX Dry Send Level (Multi-Effects Dry Send Level)

Adjusts the volume of the sound that has passed through the multi-

effects.

Value: 0–127

9MFX Chorus Send Level (Multi-Effects Chorus Send Level)

Adjusts the amount of chorus for the sound that passes through multi-effects. If you don’t want to add the Chorus effect, set it to “0.” Value: 0–127

10MFX Reverb Send Level (Multi-Effects Reverb Send Level)

Adjusts the amount of reverb for the sound that passes through multi-effects. If you don’t want to add the Reverb effect, set it to “0.” Value: 0–127

11MFX Output Assign (Multi-Effects Output Assign)

Adjusts the output destination of the sound that has passed through the multi-effects.

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

172