Roland Piano owner manual 168

Adding Effects

1Tone Select

Select the tone for which you want to make settings. Value: 1–4

This parameter is Rhythm Key Select when a rhythm set is being selected. You can select the rhythm tone (A0–C8) for which you want to make settings.

2Patch Output Assign

Specifies for each patch how the direct sound will be output.

Value:

MFX: Output in stereo through multi-effects. You can also apply chorus or reverb to the sound that passes through multi-effects. A, B: Output to the OUTPUT A (MIX) jack or OUTPUT B jack in stereo without passing through multi-effects.

1–4:Output to the INDIVIDUAL 1–4 jacks in mono without passing through multi-effects.

TONE: Outputs according to the settings for each tone.

•When the settings are such that signals are split and output from the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is inserted in the INDIVIDUAL 2 jack, the sounds from INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then output from the INDIVIDUAL 1 jack. This sound comprises the sounds from the INDIVIDUAL 1 and 2 jacks.

•This parameter is Rhythm Output Assign when a rhythm set is being selected. You can specifies for each rhythm set how the direct sound will be output.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

3Tone Output Assign

Sets the direct sound’s output method for each tone.

Value:

MFX: Output in stereo through multi-effects. You can also apply chorus or reverb to the sound that passes through multi-effects. A, B: Output to the OUTPUT A (MIX) jack or OUTPUT B jack in stereo without passing through multi-effects.

1–4:Output to the INDIVIDUAL 1–4 jacks in mono without passing through multi-effects.

•If the Patch Output Assign ( 2 ) is set to anything other than “TONE,” these settings will be ignored.

•When the Structure Type parameter (PATCH/TMT) has a setting of Type “2”–”10,” the outputs of tones 1 and 2 will be combined with tone 2, and the outputs of tones 3 and 4 will be combined with tone 4. For this reason, tone 1 will follow the settings of tone 2, and tone 3 will follow the settings of tone 4 (p. 56).

•When the settings are such that signals are split and output from the INDIVIDUAL 1 jack and INDIVIDUAL 2 jack, and no plug is inserted in the INDIVIDUAL 2 jack, the sounds from INDIVIDUAL 1 and INDIVIDUAL 2 are mixed together, then output from the INDIVIDUAL 1 jack. This sound comprises the sounds from the INDIVIDUAL 1 and 2 jacks.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

•When setting the “MFX,” set the output destination with the MFX Output Assign ( 11 ) for the sound after it has passed through the multi-effects.

•Chorus and reverb are output in mono at all times.

•The output destination of the signal after passing through the chorus is set with the Chorus Output Select ( 13 ) and the Chorus Output Assign ( 15 ).

•The output destination of the signal after passing through the reverb is set with the Reverb Output Assign ( 18 ).

4Tone Dry Send Level

Set the level of the signal that is sent to the output destination specified by Output Assign ( 2 , 3 ).

Value: 0–127

5Tone Chorus Send Level

Sets the level of the signal sent to chorus for each tone. Value: 0–127

6Tone Reverb Send Level

Sets the level of the signal sent to reverb for each tone. Value: 0–127

7MFX Type (Multi-Effects Type)

Use this parameter to select from among the 90 available multi- effects. For details on multi-effects parameters, refer to “Multi- Effects Parameters” (Sound/Parameter List).

Value: 0 (Through)–90

8MFX Dry Send Level (Multi-Effects Dry Send Level)

Adjusts the volume of the sound that has passed through the multi-

effects.

Value: 0–127

9MFX Chorus Send Level (Multi-Effects Chorus Send Level)

Adjusts the amount of chorus for the sound that passes through multi-effects. If you don’t want to add the Chorus effect, set it to “0.” Value: 0–127

168