Measure, for (Edit Range)

Check/modify the range of measures that are to be quantized. If you set “for” to “ALL,” all measures will be specified.

Type (Quantize Type)

Specifies the Quantize range.

Value

GRID: Grid Quantize will be applied to recording. Since the notes will be adjusted to the timing of the specified note value, you can use this when you want drums or bass (for example) to play in an accurate rhythm.

Grid quantize with Resolution =

SHUFFLE: Shuffle Quantize will be applied to recording. Use this when you want to produce a “shuffle” or “swing” rhythmic feel.

Shuffle quantize with Rate = 75%

Grid Resolution

This parameter is used when Grid Quantize is selected. Specifies quantization time interval as a note value. Choose a Resolution that matches the smallest note in the area you’re quantizing.

Value: , , , , , ,

Strength (Grid Quantize Strength)

This parameter is used when Grid Quantize is selected. This parameter specifies a percentage of how note timing will be corrected toward the timing interval that is specified by the Resolution parameter. With a setting of “100%,” the note will move all the way to the nearest timing interval of the Grid Resolution setting. A setting of “0%” will not change note timing at all.

Shuffle Resolution

This parameter is used when Shuffle Quantize is selected. Specifies quantization time interval as a note value.

Value: ,

Rate (Shuffle Quantize Rate)

This parameter is used when Shuffle Quantize is selected. Specifies how far apart you want a down-beat specified by the Shuffle Resolution parameter to be from the up-beat that immediately follows. By shifting the timing of an up-beat, you can create a “swing” feel. A setting of “50%” will place the timing of the up-beat note at the exact mid point between the down-beat and the next down-beat. A setting of “0%” will move the up-beat note to the same timing as the previous down-beat. A setting of “100%” will move it to the same timing as the following down-beat.

Editing Songs

Original performance data

Rate= 25%

Rate=

50%

Rate=

75%

Rate=100%

Up

Up

Up

Up

beat

beat

beat

beat

Range

Specifies the range of note numbers to be quantized.

For example, if you want to quantize the notes between C3 and C4, specify “C3–C4.” You can also specify the key range by pressing keys on the keyboard.

Channel (MIDI Channel)

Specifies the MIDI channel(s) of the notes to be quantized.

Songs

If you wish to quantize all notes, set this parameter to “ALL.” When

 

quantizing only the notes of a specific MIDI channel, select that

 

channel.

Editing

Value: ALL, 1–16

 

7. When you are finished making settings, press [8 (Execute)]

 

to execute.

 

 

Preview Function

 

 

The Preview function allows you to hear how quantizing will

 

work while you are still setting Quantize parameters (before

 

you execute operation). This is called the Preview function. If

 

you modify parameter values during preview playback, the

 

next preview playback will include those latest value changes.

 

Try various parameter settings to find the one that works best.

 

Pattern Call events assigned to a phrase track or muted

 

phrase tracks cannot be previewed.

 

Pressing [STOP/PLAY] when the Track Edit (Quantize)

 

window is displayed selects Preview mode. The two measures

 

from the current location of the song will play back repeatedly.

 

The preview start location can also be specified by pressing

 

[FWD] or [BWD]. To exit Preview mode, press [STOP/PLAY]

 

once again.

 

141

Page 141
Image 141
Roland Piano owner manual 141