Roland Piano Rear Panel, Panel Descriptions, POWER ON Switch, AC Inlet, CTL 1, CTL 2 PEDAL Jack

Panel Descriptions

Rear Panel

POWER ON Switch

Press to turn the power on/off. → (Quick Start; p. 4)

AC Inlet

Connect the included power cord to this inlet. → (Quick Start; p. 3)

CTL 1, CTL 2 PEDAL Jack

You can connect optional expression pedals (EV-5, etc.) to these jacks. By assigning a desired function to a pedal, you can use it to select or modify sound or perform various other control. You can also connect optional pedal switches (DP-2, DP-6, etc.) to sustain sound. → (Quick Start; p. 29)

HOLD PEDAL Jack

An optional pedal switch (DP-2, DP-6, etc.) can be connected to this jack for use as a hold pedal. → (Quick Start; p. 28)

This can also be set so it supports the use of half-pedaling techniques. So, after connecting an optional expression pedal (EV-5, etc.), you can employ pedal work to achieve even finer control in performances in which piano tones are used. → (p. 184)

DIGITAL OUT Connectors

(S/P DIF OPTICAL, S/P DIF COAXIAL)

The Fantom features both optical and coaxial digital out connectors (conforming to S/P DIF).

These connectors output a digital audio signal (stereo). The output signal is identical to the signal that is output from the OUTPUT A (MIX) jacks.

S/P DIF is a digital interface format used for consumer digital audio devices.

CONTRAST Knob

Adjusts the display contrast. → (Quick Start; p. 5)

MIDI Connectors (IN, OUT, THRU)

These connectors can be connected to other MIDI devices to receive

and transmit MIDI messages.

OUTPUT A (MIX) Jacks (L (MONO), R)

These jacks output the audio signal to the connected mixer/amplifier system in stereo. For mono output, use the L jack. → (Quick Start; p. 3)

OUTPUT B Jacks (L, R)

These jacks output the audio signal to the connected mixer/amplifier system in stereo.

INDIVIDUAL 1–4 Jacks

These jacks output audio signals in mono to an amp or mixer.

The setting determining whether these jacks are used as stereo OUTPUT jacks or monaural INDIVIDUAL jacks is made with the Output Assign setting (p. 168, p. 172).

PHONES Jack

This is the jack for connecting headphones (sold separately). → (Quick Start; p. 3)

18