Roland Piano owner manual Saving Multitimbre You’ve Created Write, Creating a Multitimbre

Creating a Multitimbre

Saving Multitimbre You’ve Created (Write)

Changes you make to sound settings are temporary, and will be lost if you turn off the power or select another sound. If you want to keep the modified sound, you must save it in the internal USER group (user memory)

When you modify the settings of a multitimbre, the MULTITIMBRE PLAY screen will indicate “EDITED.” Once you save the multitimbre into internal memory (user memory), the “EDITED” indication goes away.

When you perform the save procedure, the data that previously occupied the save destination will be lost. However, the factory setting data can be recovered by performing the Initialization procedure (p. 112).

1.Make sure that multitimbre you wish to save is selected.

2.Press [MENU].

The Menu window appears.

3.Press or to select “Multitimbre Edit,” and then press [8 (Select)].

The Multitimbre Edit screen appears.

4.Press [6 (Write)].

The Multitimbre Write window appears.

Save-destination multitimbre

5.Press or to specify the save-destination multitimbre.

6.Press [8 (Execute)].

The display will indicate “Are you sure?”

7.Press [8 (OK)] to execute the save operation. To cancel the operation, press [EXIT].

When Changing the Settings for the Patch or Rhythm Set Assigned to a Part in a Multitimbre

After changing the settings for the patch or rhythm set assigned to a part in a multitimbre, if you then try to save the multitimbre without first saving the changes in the settings, the following message appears.

If you do not need to keep the patch or rhythm set settings, press [8 (Execute)] to save the multitimbre.

If you want to keep the patch or rhythm set settings, press [7 (Write Part)] to access the Multitimbre Part Write window.

An indication of “EDITED” will appear for the part for which the assigned patch or rhythm set was edited. If you want to edit the patch or rhythm set settings for more than one part, press [3 (▲)] or [4 (▼)] to select the part.

Specify the save-destination patch and press [8 (Execute)]. The patch or rhythm set will be saved; then you’ll be returned to the Performance Write window, where you need to save the multitimbre once again.

114