Roland Piano Adding Effects, MFX Reverb Send Level Multi-Effects Reverb Send Level, Chorus Type

10MFX Reverb Send Level (Multi-Effects Reverb Send Level)

Adjusts the amount of reverb for the sound that passes through multi-effects. If you don’t want to add the Reverb effect, set it to “0.” Value: 0–127

11MFX Output Assign (Multi-Effects Output Assign)

Adjusts the output destination of the sound that has passed through the multi-effects.

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

12Chorus Type

Selects either chorus or delay.

Value

0 (Off): Neither chorus or delay is used.

1 (Chorus): Chorus is used.

2 (Delay): Delay is used.

3 (GM2 Chorus): General MIDI 2 chorus

13Chorus Output Select

Specifies how the sound routed through chorus will be output.

Value

MAIN: Output to the OUTPUT jacks in stereo.

REV: Output to reverb in mono.

M+R: Output to the OUTPUT jacks in stereo, and to reverb in mono.

When set to “MAIN” or “M+R,” the OUTPUT jack from which the sound is output is set in Chorus Output Assign ( 15 ).

14Chorus Level

Adjusts the volume of the sound that has passed through chorus. Value: 0–127

15Chorus Output Assign

Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select ( 13 ) is set to “MAIN” or “M+R.”

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

When Chorus Output Select ( 13 ) is set to “REV,” this setting will have no effect.

Adding Effects

16Reverb Type

Selects the type of reverb.

Value

0 (Off): Reverb is not used.

1 (Reverb): Normal reverb

2 (SRV Room): This reverb simulates typical room acoustic

reflections.

3 (SRV Hall): This reverb simulates typical concert hall acoustic

reflections.

4 (SRV Plate): This reverb simulates a reverb plate, a popular type of artificial reverb unit that derives its sound from the vibration of a metallic plate. You can also achieve unusual metallic-sounding reverbs using “SRV Plate.”

5 (GM2 Reverb): General MIDI 2 reverb

17Reverb Level

Adjusts the volume of the sound that has passed through reverb. Value: 0–127

18Reverb Output Assign

Specifies how the sound routed through reverb will be output.

Value

A:Output to the OUTPUT A (MIX) jacks in stereo.

B:Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter (SYSTEM/General) is set to

“MIX,” all sounds are output from the OUTPUT A (MIX) jacks in stereo (p. 179).

Adding Effects

169