Roland Piano Realtime Controller / D Beam Controller Settings Controller, Creating a Rhythm Set

Creating a Rhythm Set

Realtime Controller / D Beam Controller Settings (Controller)

For details on the setting, refer to “How to Make the Rhythm

Set Settings” (p. 69).

Knob

Assign 1–4 (Realtime Control Knob Assign 1–4)

Specify the functions that will be controlled by the []–[] knobs.

Value

OFF: The realtime control knob will not be used.

CC01–31,33–95:Controller numbers 1–31, 33–95

For more information about Control Change messages, please refer to “MIDI Implementation” (Sound/Parameter List).

PITCH BEND: Pitch Bend

AFTERTOUCH: Aftertouch

TEMPO: Tempo

PTN ACCENT: Rhythm Pattern Accent Rate

PTN SHFFLE: Rhythm Pattern Shuffle Rate

Switch

Assign 1–4 (Realtime Control Button Assign 1– 4)

Specify the functions that will be controlled by the []–[] buttons.

Value

OFF: The realtime control button will not be used.

CC01–31,33–95:Controller numbers 1–31, 33–95

For more information about Control Change messages, please refer to “MIDI Implementation” (Sound/Parameter List).

BEND UP: Raises the pitch in semitone steps (up to 4 octaves

higher).

BEND DOWN: Lowers the pitch in semitone steps (up to 4 octaves

lower).

AFTERTOUCH: Aftertouch

OCT UP: Raises the key range in octave steps (up to 3 octaves

higher).

OCT DOWN: Lowers the key range in octave steps (up to 3 octaves

lower).

TRNS UP: Raises the key range in semitone steps (up to 6 semitones

higher).

TRNS DOWN: Lowers the key range in semitone steps (up to 5 semitones lower).

TAP TEMPO: Tap tempo (a tempo specified by the interval at which you press the button).

PTN HOLD: Switch between Hold On/Hold Off for the Rhythm

pattern playback.

Mode 1–4 (Realtime Control Button Mode 1–4)

Specify how the []–[] buttons are to operate.

Value

MOMENTARY: The button will be on only while you are pressing (holding) it, and will be off when you release your finger from the button.

LATCH: The button will switch on/off each time you press it.

D Beam

Switch (D Beam Switch)

Switches the D Beam controller on/off.

Value: OFF, ON

Assign (D Beam Assign)

Specifies the function controlled by the D Beam controller.

Value

OFF: The D Beam controller will not be used.

CC01–31,33–95:Controller numbers 1–31, 33–95

For more information about Control Change messages, please refer to “MIDI Implementation” (Sound/Parameter List).

76