Changing How a Tone Is Sounded TMT, Creating a Patch

Creating a Patch

Sns 1–4 (Matrix Control Sens 1–4)

Sets the amount of the Matrix Control’s effect that is applied. If you wish to modify the selected parameter in a positive (+) direction – i.e., a higher value, toward the right, or faster etc. – from its current setting, select a positive (+) value. If you wish to modify the selected parameter in a negative (-) direction – i.e., a lower value, toward the left, or slower etc. – from its current setting, select a negative (-) value. When both positive and negative are selected, the changes are greater as the value increases. Set it to “0” if you don’t want this effect.

Value: -63– +63

Tone 1–4 (Tone Control Switch 1–4)

Matrix Control Tone selects the tone to which the effect is applied when using the Matrix Control.

Value

✔: The effect will be applied.

R:The effect will be applied in reverse.

TMT Control Sw (TMT Control Switch)

Use the Matrix Control to enable (ON), or disable (OFF) sounding of different tones.

Value: OFF, ON

You can also cause different tones to sound in response to notes played at different strengths (velocity) on the keyboard (p. 58). However, the Matrix Control and the keyboard velocity cannot be used simultaneously to make different tones to sound. When you want to make the different tones to sound, set the TMT Vel Control parameter (PATCH/TMT) to “OFF.”