Roland Piano owner manual Saving Performance You’ve Created Write, Creating a Performance

Saving Performance You’ve Created (Write)

Changes you make to sound settings are temporary, and will be lost if you turn off the power or select another sound. If you want to keep the modified sound, you must save it in the internal USER group (user memory)

When you modify the settings of a performance, the PERFORMANCE PLAY screen will indicate “EDITED.” Once you save the performance into internal memory (user memory), the “EDITED” indication goes away.

When you perform the save procedure, the data that previously occupied the save destination will be lost. However, the factory setting data can be recovered by performing the Initialization procedure (p. 91).

1.Make sure that performance you wish to save is selected.

2.Press [MENU].

The Menu window appears.

3.Press or to select “Performance Edit,” and then press [8 (Select)].

The Performance Edit screen appears.

4.Press [6 (Write)].

The Performance Write window appears.

Save-destination performance

5.Press or to specify the save-destination performance.

Creating a Performance

6.Press [8 (Execute)].

The display will indicate “Are you sure?”

7.Press [8 (OK)] to execute the save operation. To cancel the operation, press [EXIT].

When Changing the Settings for the Patch or Rhythm Set Assigned to a Part in a Performance

If you do not need to keep the patch or rhythm set settings, press [8	PerformanceaCreating
After changing the settings for the patch or rhythm set assigned to a
part in a performance, if you then try to save the performance
without first saving the changes in the settings, the following
message appears.
(Execute)] to save the performance.
If you want to keep the patch or rhythm set settings, press [7 (Write
Part)] to access the Performance Part Write window.

An indication of “EDITED” will appear for the part for which the assigned patch or rhythm set was edited. If you want to edit the patch or rhythm set settings for more than one part, press [3 (▲)] or [4 (▼)] to select the part.

Specify the save-destination patch and press [8 (Execute)]. The patch or rhythm set will be saved; then you’ll be returned to the Performance Write window, where you need to save the performance once again.

Registering a Favorite Performance (Favorite Sound)

You can bring together your favorite and most frequently used performances in one place by registering them in the Favorite sound. By using this function you can rapidly select favorite performances from internal memory or a Wave Expansion Board. You can register a total of 64 sounds (8 sounds x 8 banks) as favorite sounds.

For details on selecting a favorite sound, refer to “Selecting

Favorite Performances (Favorite Sound)” (p. 86).

93