Roland Piano owner manual Confirming Midi Information for Each Part Part Information, 111

7.Press [REC].

The [REC] indicator will blink, and the Recording Standby window appears. In this window you can change various settings related to realtime recording.

8.Select the recording method.

For details on making this setting, refer to “Recording Your Performance as You Play It (Realtime Recording)” (p. 129).

9.Press [STOP/PLAY].

The Recording Standby window will close, and the [REC] indicator will change from blinking to lit. After that, recording will begin.

10.Press a key to which a Rhythm pattern is assigned.

The assigned Rhythm patterns will be played according to the keys you press, and the performance will be recorded on the part (track) you selected in step 3.

11.When you finish recording, press [STOP/PLAY].

The [REC] indicator will go dark.

Playing in Multitimbre Mode

Confirming MIDI Information for Each Part (Part Information)

In Multitimbre mode, the reception status of MIDI messages that control various things can be viewed for each part. This is useful when you want to check whether the sound generator is responding correctly to the keyboard, or to operations from an external MIDI controller.

1.	Access the MULTITIMBRE PLAY screen (p. 106).
2.	Press [MENU] to open the Menu window.			Mode
3.	Press	or	to select “Part Information,” and then
	press [8 (Select)].			MultitimbreinPlaying
	The Part Information window appears.

4.Press [8 (Type)]

The Type Information window appears.

5. Press or to select the message that you want to check, and then press [8 (Select)].

Modulation: Modulation Information

Breath: Breath Information

Foot Type: Foot type Information

Volume: Volume Information

Panpot: Panpot Information

Expression: Expression Information

Hold 1: Hold 1 Information

Pitch Bend: Pitch Bend Information

Aftertouch: Aftertouch Information

Voices: Voice Information (The number of voices used)

Sys Control1–4:System Control 1–4 Information The MIDI message specified as the Sys Ctrl 1–4 Source parameter (SYSTEM/Controller).

111