Scale Tune Settings Scale Tune, 104

Creating a Performance

Volume (Receive Volume Switch)

For each MIDI channel, specify whether MIDI Volume messages will be received (ON), or not (OFF). Assigning a check mark (✔) will turn it on, and removing the check mark will turn it off.

Pan (Receive Pan Switch)

For each MIDI channel, specify whether MIDI Pan messages will be received (ON), or not (OFF). Assigning a check mark (✔) will turn it on, and removing the check mark will turn it off.

Expression (Receive Expression Switch)

For each MIDI channel, specify whether MIDI Expression messages will be received (ON), or not (OFF). Assigning a check mark (✔) will turn it on, and removing the check mark will turn it off.

Hold-1 (Receive Hold 1 Switch)

For each MIDI channel, specify whether MIDI Hold 1 messages will be received (ON), or not (OFF). Assigning a check mark (✔) will turn it on, and removing the check mark will turn it off.

Phase Lock (Phase Lock Switch)

Set Phase Lock to “✔” (ON) when you want to suppress discrepancies in timing of parts played on the same MIDI channel.

When the Phase Lock parameter is set to “ON,” parts on the same MIDI channel are put in a condition in which their timing is matched, enabling them to be played at the same time. Accordingly, a certain amount of time may elapse between reception of the Note messages and playing of the sounds. Turn this setting to “ON” only as needed.

Velocity Curve

Velocity Curve selects for each MIDI channel one of the four following Velocity Curve types that best matches the touch of the connected MIDI keyboard.

Value: 1–4


1		2	3		4

Setting Effects for a Performance (Effects/MFX/MFX Control/Chorus/ Reverb)

For details regarding effect settings, refer to the pages shown

below.

•“Applying Effects in Performance Mode or Multitimbre Mode” (p. 170)

•“Making Multi-Effects Settings (MFX/MFX Control)” (p. 174)

•“Making Chorus Settings (Chorus)” (p. 176)

•“Making Reverb Settings (Reverb)” (p. 177)