Roland Piano Auditioning the Save-Destination Rhythm Set Compare, Creating a Rhythm Set

By pressing [7 (Compare)] you can check the save-destination rhythm set (Compare function).

6.Press [8 (Execute)].

The display will indicate “Are you sure?”

7.Press [8 (OK)] to execute the save operation. To cancel the operation, press [EXIT].

Auditioning the Save-Destination Rhythm Set (Compare)

Before you save a rhythm set, you can audition the rhythm set which currently occupies the save destination to make sure that it is one you don’t mind overwriting. This can help prevent important rhythm sets from being accidentally overwritten and lost.

1.Follow the procedure in “Saving Rhythm Sets You’ve Created (Write)” through step 5 to select the save destination.

2.Press [7 (Compare)].

The Rhythm Compare window appears, making it possible to sound the currently selected save destination rhythm set.

Save-destination rhythm set

3.Play the keyboard to sound the save destination rhythm set, then check whether you really want to overwrite it.

The rhythm set auditioned using the Compare function may sound slightly different than when it is played normally.

4.If you wish to change the save destination, re-specify the

save-destination rhythm set by using or .

5.Press [7 (Write)] to return to the Rhythm Write window.

6.Press [8 (Execute)] once again to execute the Save operation.

Registering Favorite Rhythm Sets (Favorite Sound)

You can bring together your favorite and most frequently used rhythm sets in one place by registering them in the Favorite sound. By using this function you can rapidly select favorite rhythm sets from internal memory or a Wave Expansion Board. You can register a total of 64 sounds (8 sounds x 8 banks) as favorite sounds.

For details on selecting a favorite sound, refer to ““Selecting Favorite Patches (Favorite Sound)” (p. 33).

Creating a Rhythm Set

Using [1]–[8] to Register

1.Access the PATCH PLAY screen, and select the rhythm set that you wish to register (p. 40).

2.Hold down [JUMP (BANK)] and press a [1]–[8] to select the bank in which you wish to register the sound.

3.Hold down [SHIFT (REGISTRY)] and press a [1]–[8] to select the button at which you wish to register the sound.

The display will indicate “Register OK ?”

4.Press [8 (OK)] to execute the registration. To cancel the operation, press [EXIT].

Using the Favorite List Window to Register

1.Access the PATCH PLAY screen to select the rhythm set that you wish to register (p. 40).

2.Make sure that you are in the PATCH PLAY screen, and that the cursor is located at the rhythm set group or the rhythm set number.

3.While holding down [SHIFT], press [LIST]

The Favorite List window appears.

4.Press to move the cursor to the “Bank 1–8” tab, and

press or to select the bank in which you wish to register the rhythm set.

5.Press to move the cursor within the list, and

press or to select the number to which you wish to register. The number you select here corresponds to [1]–[8].

6.Press [5 (Regist)] to execute the registration.

•By pressing [6 (Remove)] you can cancel the rhythm set registration that is selected in the Favorite List window.

•By pressing [7 (Prevu)] you can audition the sound of the registered rhythm set (Phrase Preview).

7.When you have finished registering favorite sounds, press [EXIT] to close the Favorite List window.

Creating a Rhythm Set

73