Pioneer DVR-530H-S, DVR-630H-S manual Selecting the hard disk or DVD for playback and recording

04Getting started

7Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’.

Initial Setup
Basic	Clock SettingTVScreen Size
Tuner	Input Line System
Video In/Out	Power Save	Wide (16:9)
Audio In	Help	Standard (4:3)
Audio Out	Setup Navigator
Language
Recording
Playback

Use the buttons to select, then press ENTER.

8Is your TV compatible with progressive scan video?

Initial Setup
Basic	Clock SettingProgressive
Tuner	Input Line System
Video In/Out	Power Save	Compatible
Audio In	Help	Not Compatible
Audio Out	Setup Navigator Don't Know
Language
Recording
Playback

Use the buttons to select Compatible, Not

Compatible, or Don’t Know, then press ENTER.

•Note that progressive scan video is only output through the component video outputs and only when the video source is NTSC (see Using other types of video output on page 14).

9Press ENTER to exit the Setup Navigator, or select ‘Go Back’ if you want to start again.

Initial Setup
Basic	Clock Setting
Tuner	Input Line Systemetupis complete!
Video In/Out	Power SaveEnjoy using your DVD recorder!
Audio In	Help	Finish Setup
Audio Out	Setup Navigator	Go Back
Language
Recording
Playback

That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It’s possible, however, that you may want to make a couple of additional settings, depending on how the recorder is set up for TV broadcasts.

•Manual channel setting – This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setting on page 93.

•G-Code channel setting - This setting lets you assign guide channels to ensure that the G-Code programming system works correctly. See G-Code CH Setting on page 93.

•Setting up the remote to control your TV – You can set up the supplied remote control to control many brands of TV. See Setting up the remote to control your TV on page 99.

Selecting the hard disk or DVD for playback and recording

The HDD and DVD buttons (remote control and front panel) are used to select the hard disk (HDD) or DVD for playback and recording. The indicator in the front panel display shows which is currently selected.

HDDDVD

26

En