Pioneer DVR-630H-S, DVR-530H-S manual Initial Setup menu

The Initial Setup menu 13

Setting	Options	Explanation
Tuner Settings
Auto Channel Setting	Next Screen	Proceed to the next screen, select select your country, then wait for
		automatic tuning to complete. The channel mapping screen should
		appear when the recorder is set up. Press ENTER to exit this screen.
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any of the settings
		made by auto tuning. Select your country, then proceed to the manual
		channel setting screen:
		• Change channel presets using the CH +/– buttons.
		• To skip the displayed channel (because there is no station assigned
		to that channel), change the Skip setting to On.
		• Set the CH SYSTEM setting to match the channel system of your
		country or region.
		• Set the CHANNEL setting to the channel you want to assign to the
		current channel preset.
		• To manually fine tune the channel, change the AFT setting to Off
		then adjust the Level setting.
		• The Name field allows you to input a name of up to five characters
		for the current channel preset.
Channel Swapping	Next Screen	Proceed to the next screen to swap channel assignments of different
		presets so that you can group together presets that naturally go
		together. Select two presets to swap then press ENTER.
G-Code CH Setting	Next Screen	Proceed to the next screen to assign channel numbers to the guide
		channels as necessary. Look in your TV guide to see which channel
		numbers should be assigned to which guide channels. Press ENTER
		when your done to leave this screen.
Video In/Out Settings
Input Colour System	Next Screen	Proceed to the next screen to set the input colour system for each
		channel preset. Use the CH +/– buttons to change the preset. On the
		default Auto setting the recorder can generally correctly detect
		whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in
		some cases you may have to set it manually if the picture is displayed
		incorrectly.

See also About the input colour system on page 98 for more information on this setting.

Component Video Out	Interlace •	Select if your monitor/TV is not compatible with progressive-scan
		video.
	Progressive	Select if your monitor/TV is progressive-scan compatible. Check the
		operating instructions that came with your monitor/TV if you’re not
		sure.
NTSC on PAL TV	On	NTSC discs will play correctly on PAL-only TVs.
	Off •	Use if your TV is already NTSC-compatible.

Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with your TV. See also About NTSC on PAL TV on page 98 for related information.

Audio In Settings

Nicam Select	NICAM •	Record the NICAM audio in a NICAM broadcast.
	Regular Audio	Record the non-NICAM audio in a NICAM broadcast. (You can still
		switch the audio to record using the AUDIO button before recording.)

93

En