Canon FAX-L800 Relay Group Setup Summary Contd, Correctly for speed dialling on your fax unit

Relay Group Setup Summary (Cont'd)

5.SELECT ORIG UNIT	When your fax is the relay unit, this feature forces your fax to
	check the identity of the originator before it receives the document
	for relay to other units.

	ON	When your fax receives a document for relay,
		it will check the identity of the originator
		before it receives the document. In order for
		this feature to perform correctly, the telephone
		number of the orginator unit must be registered
		correctly for speed dialling on your fax unit.
	TEL =	Press the One-touch Speed Dialling button or
		press the CODED DIAL button followed by
		the three-digit code where the number for the
		originator fax is registered and press SET.
	OFF	Your fax will receive a document for relay
		without checking the identity of the
		originator.
6.PRINT RX DOC.	When your fax is the relay unit, this setting determines if your fax
	unit prints a copy of every document that it relays.
	OFF	Your fax does not print a copy of every
		document it relays to other fax units.
	ON	Your fax prints a copy of every document it
		relays to other fax units.
7.SELECT LOCATIONS	This item allows you to select the fax units to receive the document
	your unit relays. The number of fax units to receive the document
	must be registered for One-touch or Coded Speed Dialling. You can
	not enter a number with regular dialling.
	TEL =	Close the One-touch Speed Dialling panels
		and press the speed dialling buttons where the
		numbers of the fax units to receive the relay
		broadcast are registered then press SET. You
		can select up to 200 destinations.
8.TX REPORT	This feature determines if your fax unit returns a relay transmission
	report to the originator after your fax unit receives and relays a
	document.
	TRANSMIT	After your fax unit relays a document, it sends
		a transmission report back to the originator.
		In order for the feature to perform correctly,
		the originator's unit telephone number must be
		registered on your fax for One-touch or Coded
		Speed Dialling.
	NOT TRANSMIT	No relay transmission report is sent to the
		originator after a document has been relayed.

Chapter 9 Using a Relay Network 9-5