Canon FAX-L800 How the Fax Operates with Default Settings, 12-10Other Special Features Chapter

How the Fax Operates with Default Settings

There are many minor features that you can change to customize the operation of the fax. Some of these features are listed in the table below. The description in the third column is the default setting. In other words, this is how the fax will operate unless you change the referenced setting.

If your fax is not operating as described, this means the default may have already been changed. In such a case you may want to go to the referenced page to restore the default setting.

Feature	Menu Item	Description of default
Batch sending	BATCH TX	If several documents for the same destination with the same
		telephone number are stored in the memory for delayed
		sending, when the timer goes off for one of the documents all
		other documents for the same destination are sent together in
		the same transmission, regardless of their time setting. (Q16-10)
Button press sound	VOLUME CONTROL	Every time you press a button on the numeric keypad you will
	KEYPAD VOLUME	hear a beep. The volume of this beep can be adjusted or it can
		be turned off. (Q16-6)
Date format	DATE SETUP	In the standby mode, the date is listed in the format
		DD/MM 'YY. Two other formats are available. (Q16-25)
Dialling timeout	TIME OUT	The fax automatically pauses ®ve seconds after you press a
		speed dialling button to allow you to dial other numbers for
		sequential broadcasting. You can turn the timeout feature off.
		(Q16-11)
Document smaller	SELECT CASSETTE	If you receive a letter-size document and only a larger paper size
than paper	CASSETTE SW B	is available, the fax prints the document on the larger paper. If
		you do not want the smaller documents printed on larger paper,
		you can receive them in the memory. This switch is effective
		only when the letter size paper runs out. (Q16-15)
Document too large	SELECT CASSETTE	If you receive a legal-size document and only letter-size paper is
for paper	CASSETTE SW A	available, the document will be divided over two pages or
		reduced. If you do not want to divide documents, you can
		receive them in the memory. This switch is effective only when
		the side cassette is set to legal size and out of legal size paper.
		(Q16-15)
ECM sending/receiving	ECM TX	The fax is set to conduct all transactions using ECM (error
	ECM RX	correction mode). If transmission speed appears to be extremely
		slow, you may be able to speed up transmission time by turning
		ECM off. (Q16-9, 16-13)
Energy Saver	ENERGY SAVER	The Energy Saver feature is off and will remain off until you
		turn it on. (Q3-19, 16-26)
Language	DISPLAY LANGUAGE	The initial display language is English. Other languages are
		available. (Q16-26)

12-10Other Special Features Chapter 12