Canon FAX-L800 manual Relay Group Setup Summary, Group Dial Name

SET

ABC DEF SET

1 2 3

GHI JKL MNO

4 5 6

PQRS TUV WXYZ

7 8 9

	0
<	<
	SET

2.Give the relay group a number from 00 to 99. Press SET.

SETUP FILE

SET RLY TX GROUP# 00

Use the buttons on the numeric keypad to enter the two-digit relay group number and press SET.

SETUP FILE 1.GROUP DIAL NAME

Use the search buttons to display all the items in the menu.

With the item displayed that you want to set, press SET. Then follow the instructions in the table below to set up the relay group.

When you are ®nished, press STOP.

Relay Group Setup Summary

The default settings, shown in bold, remain in effect unless you change them.

1.GROUP DIAL NAME	Name (24 characters)
	Enter a name for the relay group. The name can be up to 24-characters
	long. Then press SET.
2.PASSWORD	0000-9999
	This is the four-digit password that protects the relay box settings you
	are about to set up. After you set this password, you will have to enter
	it every time you want to view or change these settings. Enter a four-
	digit password and press SET.
3.SUBADDRESS	20 digits (* # spaces)
	This is the ITU-T subaddress. Enter a number up to 20 digits long (it
	can include spaces and the symbols * and #).
4.RX PASSWORD	20 digits (* # spaces)
	When your fax is the relay unit, this ITU-T password must match the
	ITU-T password of the document sent from the orginator in order for
	your fax to receive the document. Otherwise, your fax will not receive
	the document. Enter a number up to 20 digits long (it can include
	spaces and the symbols * and #).

9-4 Using a Relay Network Chapter 9