Canon FAX-L800 manual 30Setting Up and Using Speed Dialling Chapter

or

0 0 0

1 2 7

2.Press the One-touch Speed Dialling button, or press CODED DIAL followed by the three-digit code, where the group of telephone numbers you want to dial is registered.

The fax starts to send the document

TEL=GROUP DIAL

01 CANON USA

TRANSMIT 0025

SCANNING DOC. P.001

You will see a series of brief, alternating messages that tell you the fax is dialling, calling, then transmitting the document. The number being dialled, name of the other party, and the transaction number of the document are also displayed.

Here are some points you should keep in mind when you use Group Dialling:

JTo start scanning immediately, press START/SCAN. Otherwise the fax will wait 5 seconds before it starts scanning. This timeout feature can be turned off. (Q16-11)

JThe fax will not dial the numbers for the Group Dialling number until you set the document on the fax. If you press the One-touch Speed Dialling button or press CODED DIAL followed by a three-digit code, before you load the document, the fax will prompt you:

SET DOCUMENT

JIf you press a One-touch Speed Dialling button, or press CODED DIAL followed by a three-digit code, where no number has been registered, the fax will display:

NO TEL# 12

If you want to cancel the transmission after you press a One-touch or Coded Speed Dialling button, press STOP.

4-30Setting Up and Using Speed Dialling Chapter 4