Canon FAX-L800 Replace Cartridge, Check Printer Cover, Supply REC. Paper, 28Setting Up Chapter

Models: FAX-L800

1 370
Download 370 pages 55.98 Kb
Page 42
Image 42

ENERGY SAVER

The unit has warmed up and is ready to use when you see the date and time display.

26/12 '97 FRI 12:20

When the date is displayed on the LCD, the fax is in the standby mode and ready for normal operation. If the alarm starts blinking red, wait for one of the following messages to appear.

REPLACE CARTRIDGE

The toner cartridge has run out of toner.

 

Replace the toner cartridge.

CHECK PRINTER COVER

The printer cover is not closed completely. If it

 

does not close easily, do not force it. Remove the

 

toner cartridge, and insert it again. Make sure it

 

is sitting level inside the fax machine then close

 

the printer cover again. And make sure the toner

 

cartridge is installed in the fax unit.

SUPPLY REC. PAPER

One of the paper cassettes is empty or one of the

 

paper cassettes is not seated correctly inside the

 

fax machine. Remove each cassette. Make sure

 

the stack of paper is below the tabs and insert

 

the paper cassette again. Push the paper

 

cassettes all the way in until they lock in place.

 

 

When ENERGY SAVER is ON, the fax switches to the energy save mode in a speci®ed length of time (Q3-19, 16-26). The ENERGY SAVER indicator lights red and ENERGY SAVER appears in the LCD display.

ENERGY SAVER

To restore to the standby mode, press the ENERGY SAVER button.

2-28Setting Up

Chapter 2

Page 42
Image 42
Canon FAX-L800 manual Replace Cartridge, Check Printer Cover, Supply REC. Paper, 28Setting Up Chapter