Canon FAX-L800 manual Transfer Setup Summary, Off

SET	3. Press SET then follow the summary in the table below to perform the
	settings.

4. Press STOP to return to standby.

Transfer Setup Summary

The default settings, shown in bold below, remain in effect unless you change them.

1.FILE NAME	Enter a ®le name up to 24 characters long.
2.SELECT LOCATIONS	Select the numbers of the fax machines where you want documents
	transferred.
	TEL =	Close the One-touch Speed Dialling panels
		and press a One-touch Speed Dialling button
		or press the CODED DIAL button followed
		by a three-digit code for the Coded Speed
		Dialling number to enter the number of the
		fax machine where you want documents
		transferred. The telephone number of the
		destination fax must be registered for One-
		touch or Coded Speed Dialling on your fax.
3.PASSWORD	0000-9999
	Enter a four-digit number (0000-9999) to protect the transfer ®le
	settings. Use of a password is recommended. This operation
	password protects the transfer ®le from unauthorized access to your
	settings. You will also need to enter this password when you put the
	fax in the document transfer mode.
4.SELECT ORIG UNIT	Allows you to set the fax to receive and relay documents only from
	originator fax units that you designate.
	OFF	All fax transmissions are received and
		transferred.
	ON	The fax machine receives and transfers
		transmissions only from fax units that you
		designate by fax telephone number.
	TEL =	Press the One-touch Speed Dialling button or
		press the CODED DIAL button followed by
		the three-digit code to designate the
		originator fax machines for receive and
		transfer. The telephone number of the
		originator fax must be registered for One-
		touch or Coded Speed Dialling on your fax.

Chapter 7 Receiving Documents 7-13