Canon FAX-L800 manual Access Settings, 12Using the Memory Features Chapter

Access Settings

SET BOX

A two-digit code (00-99) you assign to the box to select it when you need to scan documents into the box or to open it to view or change the settings. The box number and ®le name appear in printed reports for reference.

PASSWORD

If you created a password when you created the memory box (below 2.PASSWORD), you will have to enter the password to see the rest of the settings.

Main Settings

1.FILE NAME

A personal name you can assign to the memory box to identify it in printed reports.

2.PASSWORD

A four-digit password you assign to the memory box to protect the settings from unauthorized access. You must also use this password and the box number to print documents stored in the memory box. Assigning a password is optional, but strongly recommended, especially if you want to keep the memory box setup and the documents you receive con®dential.

3.SUBADDRESS

This is the ITU-T subaddress.

4.TX PASSWORD

This is your TX password. TX password is only for polling sending. Your TX password must match the ITU-T password with which the other party calls you. If they do not match the other party will not receive your document.

5.RX PASSWORD

This is your RX password. Your RX password must match the ITU-T password assigned to documents that you receive. If the passwords do not match, your fax will not receive the document.

TX Password ITU-T Password

Other party's fax

FAX-L800

RX Password ITU-T Password

The main settings apply to all three features below, including RECEIVE, TRANSMIT, and POLLING TX.

8-12Using the Memory Features Chapter 8