Canon FAX-L800 Group dial, Group number, USE lamp, Jack, Long distance dialling, Manual receiving

Group dial

Group Dialling allows you to dial up to 199 previously registered One-touch Speed Dialling or Coded Speed Dialling numbers together as a group. This means you only need to press a One-touch speed dial button or the CODED DIAL button followed by a three-digit code to dial a large group of numbers automatically. You register each group of facsimile numbers for a One-touch or Coded Speed Dialling button, so make sure a button is available before trying to register Group Dialling. Once a group is de®ned, you can add or delete numbers to/from the group.

Group number

List of all facsimiles to receive a relayed document. These are two-digit codes between 00-99. The group number is registered on the facsimile with the relay feature.

I

IN USE lamp

Lights when the telephone line is in use.

J

Jack

The telephone line receptacles on your wall and on the side of your fax unit used to connect your fax machine to the telephone line and handset or extension phone.

L

Long distance dialling

When dialling or registering long-distance numbers, you sometimes have to insert a pause either within or after the telephone number. The destination and length of the pause differ depending on the system. Contact your local authorized Canon dealer or your local telephone company for further information if you experience problems with long distance dialling.

M

Manual receiving

Use this setting if you have installed the optional handset kit and there is only one line connected to your of®ce which you use for both phone and fax communication, and you want to monitor all incoming calls yourself. When you hear the ringer, pick up the handset and answer the phone. If you hear a slow beep, this means someone is trying to send you a facsimile transmission. Press START/SCAN and hang up the handset to start receiving the document. You can not receive documents if there is another document fed into the fax.

Glossary G-5