Canon FAX-L800 manual Setting Up Polling Sending, Before You Can Be Polled to Send

6. Press STOP to return to standby.

Setting Up Polling Sending

This section shows you how to set up your fax to store and hold a document until it is polled by another fax to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to poll your fax to receive documents and con®rm the following points:

JThe other parties must know your ITU-T subaddress number.

JIf you are also using an ITU-T password for the polling box, they must also know this password. This password setting is optional.

JYour TX PASSWORD must match the ITU-T password attached when the other party calls you. Con®rm that the TX PASSWORD on your fax matches the ITU-T password attached when the other party calls you.

JIf the other party's fax does not support ITU-T subaddress/password transactions, you may be able to use the polling box #00.

Setting Up a Polling Box

DATA REGISTRATION

SET

Before you can use polling sending, you must create a polling box with the File settings. The polling box holds the document in the memory until the other party polls your fax to send the document.

1.Open the FILE SETTINGS menu.

Open both One-touch Speed Dialling panels. Then press DATA REGISTRATION.

REGISTRATION

1.DATA REGISTRATION

Press SET.

DATA REGISTRATION

1.USER SETTINGS

Chapter 11 Setting Up and Using Polling 11-13