Canon FAX-L800 manual Tone

T

Timed sending

See delayed transmission.

Tone/pulse setting

This setting allows you to set the fax to touch tone (T) or pulse (P) dialling, depending on the type of phone line you have installed.

TONE

You can switch temporarily from pulse to tone dialling by pressing TONE/+ before dialling. Data services may require that you use tone dialling, so if you have a conventional pulse dial telephone and need to use tone dial to access the data service, press TONE/+ to tone dial on your pulse telephone line.

Toner cartridge

Your fax machine uses a patented FX4 cartridge which contains both the photosensitive drum and toner in one compact unit. For details about disposing of used toner cartridges, contact your local dealer or authorized Canon representative.

Touch-tone

A touch-toneor tone dial telephone is dialled by pressing buttons that send tones of varying pitch to the telephone switching system.

Transaction number

When a document is scanned into or received in the memory, it is assigned a transaction number (TX/RX). You can select documents in the memory for sending, printing, or deleting by specifying the transaction number.

Transfer

A special feature you can set up on the fax to have all documents received on the main fax unit transferred to another fax unit. For example, you could have the main fax unit in the of®ce transfer all documents to your fax at home. You can set the day and time for this feature to turn on and off. Please remember, however, that documents received in a con®dential mailbox or a memory box can not be transferred. See transfer password.

Transfer password

Protects the transfer settings from unauthorized access. You must enter the transfer password, a four-digit code (0000-9999), in order to view or change the transfer settings.

Transmission time

A fax transmission consists of three stages: the pre-message handshake, the message transmission, and the post- message handshake. The transmission time described in this user's guide is not the total time required for the entire transmission. It is only the time for the message transmission. The transmission time described in this user's guide is the fastest time achieved when faxes communicate in the same mode.

G-12 Glossary