Canon FAX-L800 manual Memory Lock Setup Summary, MEM Lock Password, Output no, Output YES

Memory Lock Setup Summary

The default settings, shown in bold, remain in effect unless you change them.

1.MEM LOCK PASSWORD		0000 to 9999
	This password protects the memory lock settings. You must also
	use this password to unlock the memory so you can print
	documents stored in the memory. Use the buttons on the numeric
	keypad to enter a four-digit password and press SET.
2.REPORT	Set the fax to print reports or not. This setting affects only reports
	that print automatically, such as Activity Reports for sending and
	receiving, and Activity Management Reports.
	OUTPUT NO	A report is not printed while in the
		memory lock mode.
	OUTPUT YES	A report is printed while the fax is in
		the memory lock mode.
3.TIME SETUP	Set the times for the fax to enter and leave the memory lock
	mode. The time settings are optional. If you do not set the times,
	you can use the MEMORY RECEPTION button to turn the
	memory lock feature on and off.
	OFF	Turns off the timer setup. You can
		turn the memory lock mode on and
		off with the MEMORY
		RECEPTION button.
	ON	Turns on the timer setup. You can
		still use the MEMORY
		RECEPTION button to turn the
		memory lock mode on and off.
	START TIME	Sets the time for the fax to enter the
		memory lock mode.
	EVERYDAY	Set the time in 24-hour format. Up to
	SELECT DAYS	5 starting times can be speci®ed for
		every day or each selected day.
	END TIME	Sets the time for the fax to leave the
		memory lock mode.
	EVERYDAY	Set the time in 24-hour format. Up to
	SELECT DAYS	5 starting times can be speci®ed for
		every day or each selected day.

Chapter 13 Restricting Use of the Fax 13-17