List of LCD Display Messages Alphabetic List

CODE	PROBLEM	SOLUTION

#080	The other party's fax does not support receiving a	Call the other party and con®rm whether or not
	document with a subaddress.	their fax supports subaddress receiving. Try sending
		again without a subaddress.

#081	The other party's fax does not support receiving a	Call the other party and con®rm whether or not
	document with an ITU-T password.	their fax supports ITU-T password receiving. Try
		sending again without a password.

#082	The other party's fax does not support accepting a	Call the other party and con®rm whether or not
	polling request with a subaddress.	their fax can accept a polling request with a
		subaddress. Try sending again without a subaddress.

#083	You can not poll the other party to receive a	Call the other party and con®rm that the subaddress
	document because a subaddress and/or password does	and/or password that you are using are correct.
	not match.

#084	The other party can not receive a document with an	Call the other party and con®rm whether or not the
	ITU-T password.	other party's fax supports receiving a polling request
		with an ITU-T password. Ask the other party to try
		again without an ITU-T password.

#102	You can not receive documents because a subaddress	Call the other party and con®rm whether or not you
	and/or password does not match.	are using the correct subaddress and/or password.

#995	Documents in the memory to be sent have been	The current transmission has been cleared. You may
	cleared.	start again, start a new operation, or leave the fax in
		standby.

List of LCD Display Messages (Alphabetic List)

Here is a list of messages that are displayed on the screen when a problem occurs in the fax or the printer.

MESSAGE	WHAT IT MEANS

#ALREADY IN USE	The box number you entered is already in use. For example, you can not use the
	same box number for a con®dential mailbox and a polling box. Try again with
	another box number.

AUTO REDIAL	The other party's line was busy on the previous dialling attempt and your fax unit is
	dialling the number again. To cancel redialling, press STOP when direct dialling or
	press DELETE FILE, select transaction number then press SET when memory
	sending.

BUSY/NO SIGNAL	The other party did not answer, even after redialling. Wait for a few minutes and try
	again. When you send documents long distance, press PAUSE after dialling. If you
	still can not send the document, the other party may have turned off their fax unit.