Canon FAX-L800 manual Program button Setup Summary, Print Report

PROGRAM button Setup Summary

The default (PRINT REPORT) remains in effect unless you change it.

PRINT REPORT	Sets the PROGRAM button to function as a print
	transmission report button. Whenever you need a
	transmission report for a document you are sending,
	just press the PROGRAM button and a transmission
	report will print after the document is sent.
REPORT	Assigns the PROGRAM button the functions of the
	REPORT button. Whenever you need to print a
	report, all you have to do is press the PROGRAM
	button. This saves you the effort of opening both One-
	touch Speed Dialling panels to press the REPORT
	button.
D.T.	Sets the PROGRAM button to function like the D.T.
	button so you do not have to open both One-touch
	Speed Dialling panels to press the D.T. button.
TONE	Sets the PROGRAM button to function like TONE
	button so you do not have to open both One-touch
	Speed Dialling panels to press the TONE button.
SCANNING MODE	Set up the RESOLUTION, CONTRAST, or
	DOCUMENT TYPE buttons for sending special
	documents and then store the settings under the
	PROGRAM button. The next time you need to set
	them before a document transmission, you can set them
	with a single button press.
STAMP	If you had the optional stamp feature installed for you,
	this feature is available. If you select STAMP you can
	turn the stamp feature on and off without opening both
	One-touch Speed Dialling panels to press the STAMP
	button.

Chapter 12 Other Special Features 12-5