Canon FAX-L800 manual Using Speed Dialling, Using One-touch Speed Dialling

Using Speed Dialling

Follow the procedures in this section to use speed dialling. The three speed dialling methods are One-touch Speed Dialling, Coded Speed Dialling, and Group Dialling. If you forget where a number is registered, you can ®nd it and dial it with directory dialling. (Q4-31)

Using One-touch Speed Dialling

01

72

Follow this procedure to start a transmission and send a document at the press of a One-touch Speed Dialling button.

To use this feature, you must ®rst register a telephone number for One-touch Speed Dialling. (Q4-6)

1.Set the document on the fax. (Q6-3)

Set the document resolution, contrast, and document type. (Q6-4) You can also select a sender's name with the TTI SELECTOR. (Q6-6)

DOCUMENT READY

2.Press the One-touch Speed Dialling button where the telephone number you want to dial is registered.

If you do not see the number of the button you want, open the ®rst or second One-touch Speed Dialling panel to see more buttons. After 5 seconds, the fax starts to send the document.

TEL= 123 4567

01 CANON USA

TRANSMIT 0025

SCANNING DOC. P.001

You will see a series of brief, alternating messages that tell you the fax is dialling, calling, then transmitting the document. The number being dialled, name of the other party, and the transaction number of the document are also displayed.

4-26Setting Up and Using Speed Dialling Chapter 4