Canon FAX-L800 manual SET Document

Here are some important points you should keep in mind when you use One- touch Speed Dialling:

JTo start scanning immediately, press START/SCAN. Otherwise the fax will wait 5 seconds before it starts scanning. This timeout feature can be turned off. (Q16-11)

JTo locate and press the correct button, you may have to open the One- touch Speed Dialling panels.

JThe fax will not dial the number registered for the One-touch Speed Dialling button until you set the document on the fax for sending. If you press the button before you load the document, the fax will prompt you:

SET DOCUMENT

JIf you press a One-touch Speed Dialling button where no number has been registered, the fax tells you:

NO TEL# 12

JIf you want to cancel the transmission after you press a One-touch Speed Dialling button, press STOP. (Q6-8)

JWhen you come to a step in any procedure where you have to dial a number, you can press a One-touch Speed Dialling button to dial.

When you register a number for One-touch Speed Dialling, Coded Speed Dialling and Group Dialling, you can, as an option, set the time you want your document to go out (up to 5 different times in a day). If you are using a speed dial button that was set by someone else, and you would like your document to go out at the preset time, verify if the preset time feature is being used for that button. (Q4-9, 4-17, 4-24, 16-30)

Chapter 4 Setting Up and Using Speed Dialling 4-27