Canon FAX-L800 manual Polling to Receive at a Preset Time

7. Press START/SCAN to start polling the other faxes.

JIf the other document is holding the document under a subaddress, your

subaddress must match the other party's subaddress.

JIf the other document is holding the document under both a subaddress and password, then you must poll the fax with both a matching subaddress and password.

Polling to Receive at a Preset Time

DATA REGISTRATION

SET

< <

Follow this procedure to set the fax to poll another fax at a preset time. Polling faxes at preset times allows you to conduct document transactions later at night when the telephone rates are lower.

Before you set up polling at a preset time, make sure you have performed the following tasks:

JThe numbers you want to register for dialling must be registered for One- touch or Coded Speed Dialling buttons. (Q4-6, 4-14)

JWhen you register the One-touch or Coded Speed dialling button, you must turn on OPTIONAL SETTINGS and set the TX TYPE for POLLING RX when the other party set subaddress/password, you have to register an ITU-T subaddress and/or password for the speed dialling button. (Q4-8, 4-16)

JIf you have to poll a number that you use regularly, you should register it once again for another speed dialling button so you can set the ITU-T subaddress and/or password to match the polling box of the other party's fax and register the second number for preset polling.

1.Open the PRESET POLLING menu.

Open both One-touch Speed Dialling panels. Then press DATA REGISTRATION.

REGISTRATION

1.DATA REGISTRATION

Press SET.

DATA REGISTRATION

1.USER SETTINGS

Press the search buttons until you see the display below.

DATA REGISTRATION

6.FILE SETTINGS

Chapter 11 Setting Up and Using Polling 11-5