Canon FAX-L800 manual Changing the Relay Broadcast Settings, Relay Bcast

Relay Group Setup Summary (Cont'd)

9.TX START TIME	You can set your fax to hold documents and then relay them at a
	preset time. If you do not set this item, all documents received for
	relay are relayed immediately. If you want to use this feature, press
	SET.
	Use the buttons on the numeric keypad to enter the time in 24-hour
	format. You can set up to 5 times to relay documents within a 24-hour
	period every day.
10.RELAY B'CAST	This feature switches relay broadcasting for this group on and off
	without altering any of the other settings.
	ON	Your fax unit receives and relay a document set
		for relay broadcasting.
	OFF	Your fax unit will not receive and relay a
		document set for relay broadcasting

Changing the Relay Broadcast Settings

<

<

SET

Follow this procedure to change the relay broadcast settings.

JIf you want to add to the list of fax units to receive relay broadcasts from your fax unit, make sure that the numbers you want to add are registered for One-touch or Coded Speed Dialling.

JIf you want to set your fax unit to con®rm the identity of the originator before it receives a document for relay broadcasting, make sure the telephone number of the originator's fax unit is registered for One-touch or Coded Speed Dialling on your fax unit.

1. Open the RELAY TX GROUP menu. (Q9-3)

RELAY TX GROUP

1.SETUP FILE

2. Press the search buttons until you see the display below.

RELAY TX GROUP 2.CHANGE DATA

3. Press SET.

CHANGE DATA

SET RLY TX GROUP# 00

9-6 Using a Relay Network Chapter 9