Canon FAX-L800 manual ENGLISH, FRENCH, SPANISH, GERMAN, Dutch, ITALIAN, SLOVENE, SWEDISH, Finnish

6.DISPLAY LANGUAGE	Select a language for prompts, messages, menus and printed reports.
	The number of languages available may be different depending on
	where you purchased your fax machine.
	ENGLISH, FRENCH, SPANISH, GERMAN, DUTCH,
	ITALIAN, SLOVENE, SWEDISH, FINNISH,
	PORTUGUISE, DANISH, NORWEGIAN
7.TX START SPEED	Set the transmission speed for all documents you send.
	Available settings: 14400, 9600, 7200, 4800, 2400 bps
8.RX START SPEED	Set the transmission speed for all documents you receive.
	Available settings: 14400, 9600, 7200, 4800, 2400 bps
9.RX PASSWORD	Set an RX password to match the ITU-T password of all incoming
	document transmissions.
	Enter a 20-digit (max.) ITU-T password. To receive a document, this
	RX password must match the ITU-T password of the incoming
	document.
	After the RX password has been set, all incoming documents must
	have a matching ITU-T password.
	-or-
	The document will be received regardless of this setting if the
	incoming document has a matching subaddress and password for a
	memory box.
10.ENERGY SAVER	Set the fax machine to reduce power consumption when not in use.
	(Q3-19)
OFF	Fax machine does not power down even when it is idle.
ON	The fax machine reduces power consumption after it has remained
	idle for a speci®ed length of time.
	ENERGY SVR TIME	Set the idle time to elapse and trigger
		reduced power consumption. (03 to 30
		min.) Default is 03 min.
11.PHONE NO. CHECK	Allows you to prevent sending a document to an unwanted
	destination. The number you dial is checked with connected number
	and if they match, then the document is sent.
OFF	The number is not checked.
ON	The fax uses the last six digits of the number you dial to match with
	the last six digits of the other party's number registered on the
	remote fax. If the numbers match the document is sent. Otherwise,
	the document is not sent.

16-26Summary of Important Settings Chapter 16