Canon FAX-L800 manual Auto Redial, 16-10Summary of Important Settings Chapter

3.AUTO REDIAL	Select whether to perform automatic redial when the other line is
	busy or no answer. (Q6-16)
ON	Customize the redial operation.
	1.REDIAL TIMES	From 01 to 10 times. (02TIMES)
	2.REDIAL INTERVAL	From 02 to 99 minutes. (02MIN.)
	3.TX ERROR RESEND Set redialling to handle error
		transmissions.
	ON	Turn page resend off and on, and
		select what pages to resend.
		RESEND TX FROM
		ERROR & 1ST PG
		ERROR PAGE
		ALL PAGES
	OFF	No portion of a document is re-sent
		after an error occurs.
OFF	After the ®rst attempt at dialling fails, re-dialling is not attempted.
4.BATCH TX	If there is more than one document waiting in the memory to be sent
	to the same destination, after the timer goes off to send the ®rst
ON	document, then all documents are sent together in the same
OFF	transmission. With this feature the fax unit makes one phone call
	instead of faxing each document with a separate phone call. This
	feature saves time and money. (Q16-27)
5.QUICK ON-LINE TX	Turn quick memory sending off and on. When ON the fax unit starts
ON	sending the document while it is still being scanned. (Q6-11)
OFF
6.ERASE FAILED TX	Determine what happens to the document in the memory if an error
	occurs during its transmission.
OFF	Document remains in the memory after an error occurs during
	sending.
ON	Document is erased from the memory if an error occurs during
	transmission.

16-10Summary of Important Settings Chapter 16