Canon FAX-L800 Is your document too light?, Has the relay unit set up a relay group correctly?

Models: FAX-L800

1 370
Download 370 pages 55.98 Kb
Page 301
Image 301

Is your document too light?

Press the CONTRAST button until DARKER is selected then try sending again. (Q6-4)

Is the scanning glass on your fax clean?

Copy a document on your fax and see if the copy is streaked or dirty. If the copy is streaked or dirty, clean the scanning glass. (Q15-22)

JCan not perform relay sending?

Does the relay unit support ITU-T subaddress/password transactions?

If the relay unit does not support ITU-T subaddress/password transactions, you can not perform relay sending.

Has the relay unit set up a relay group correctly?

The relay group must be set up correctly on the relay unit and the relay unit must tell you the subaddress and password. If the relay unit has set a ITU-T password, then you must send the document with the correct password as well as the correct subaddress. (Q9-8)

Does the ITU-T subaddress/password match those of the relay unit? Make sure you set the correct subaddress/password. (Q9-9)

Is the memory of the relay unit full?

Check with the relay unit and make sure there is enough memory to receive your document. Ask the relay unit to clear their memory then try again.

JCan not perform con®dential sending?

Does the other fax support ITU-T subaddress/password transactions?

If the other fax does not support ITU-T subaddress/password transactions, you can not perform con®dential sending.

Has the other party set up a con®dential mailbox?

The other party must set up a con®dential mailbox on the other fax and tell you the subaddress and password. If the other party has set a ITU-T password, then you must send the document with the correct password as well as the correct subaddress. (Q10-9)

Does the ITU-T subaddress/password match those of the other party? Make sure you set the correct subaddress/password. (Q10-9)

Is the memory of the other fax full?

Check with the other party and make sure there is enough memory to receive your document. Ask the other party to clear their memory then try again.

Chapter 15

Maintenance & Frequently Asked Questions 15-31

Page 301
Image 301
Canon FAX-L800 manual Is your document too light?, Has the relay unit set up a relay group correctly?