Canon FAX-L800 manual Resolution, Restricted reception, Rotary pulse, RX password, Scanning area

JMulti TX/RX Report When you send a document to more than one destination, the fax prints a report to show you the name and numbers of the other parties, whether the transactions were completed or not, and errors if any. The fax automatically prints multi-transaction reports for sending documents to more than one destination, delayed sending documents to more than one destination, sending documents through a relay fax to more than one destination, and sending con®dential documents to more than one destination if the mailboxes are the same on every fax unit.

JRelay Broadcast Report After sending a document through a relay fax, you may receive a relay broadcast report from the fax machine that relayed the document. This shows whether or not the document was successfully relayed to all the ®nal destinations. To receive a report, the other machine must be set to print a relay broadcast report.

Resolution

The density of dots for an output device like a fax, scanner, or printer. Expressed in terms of dots per inch (dpi). Low resolution causes font characters and graphics to have a jagged appearance. Higher resolution means smoother curves and angles as well as a better match to traditional typeface designs. Resolution values are represented by horizontal data and vertical data, for example, 600 x 600 dpi.

Restricted reception

The ability of the fax unit to restrict incoming documents. With this feature turned on, the fax unit will receive documents only from speed dialling numbers registered in your fax unit.

Rotary pulse

A rotary-pulseor pulse dial telephone is dialled by manually rotating a dial to send pulses to the telephone switching system. When you pulse dial, you will hear clicks. With tone dialling, you will hear tones.

RX password

The ITU-T password set on your fax to match the ITU-T password of all incoming documents. If your RX password matches the ITU-T password of the incoming transmission, the document is received. If the passwords do not match, the document is not received. The maximum length of the password is 20 digits and may consist of numbers, spaces, asterisk (*), and pound mark (#).

S

Scanning area

The scanning area is narrower than the original document size on the entire border around the document. Documents you send should have some margin on the sides and the top and bottom. Anything over this margin can not be scanned for sending.

G-10 Glossary