Canon FAX-L800 manual Transfer Setup Summary Contd, Every DAY, 14Receiving Documents Chapter

Transfer Setup Summary (Cont'd)

5.TIME SETUP*	Sets the time to move the fax into and out of the transfer mode. If
	you do not set the timer, you can still switch the fax into the
	transfer mode manually.
1.START TIME	Set a time to move the fax automatically into the transfer mode.
EVERY DAY	:	Sets the fax to move into the transfer mode
		every day. You can set up to 5 starting times
		for every day of the week.
SELECT DAYS	1.SUN to 7.SAT	Sets the fax to move into the transfer mode
		only on selected days of the week.
	:	You can set up to 5 starting times for the
		selected days.
2.END TIME	Sets the time for the fax to leave the transfer mode and return to
	the normal mode.
EVERY DAY	:	Sets the fax to move out of the transfer mode
		every day. You can set up to 5 end times for
		every day of the week.
SELECT DAYS	1.SUN to 7.SAT	Sets the fax to move out of the transfer mode
	:	on selected days of the week. You can set up
		to 5 end times for the selected days.
6.PRINT RX DOC.	Sets the fax to print a copy of the transferred document at the
	transfer unit.
	OFF	Received and transferred documents are not
		printed at the transfer unit.
	ON	A copy of every document received and
		transferred is printed at the transfer unit.
	# OF RX COPIES	To enter the number of copies (01-99) use the
		numeric keypad to enter the number or press

the search buttons to increase or decrease the number and press SET.

*The following settings are valid: You can set EVERY DAY for the start time and then use SELECT DAYS to set end times. You can also set SELECT DAYS for start times and then use the EVERY DAY setting for the end time. However, you can not set both EVERY DAY and SELECT DAYS for the start time or end time.

7-14Receiving Documents Chapter 7