Canon FAX-L800 manual TX Stamp Setup Summary, Stamp Action, Direct & Memory TX, Direct TX

<

<

<

SET

<

SET

3. Press the search buttons until you see the display below.

TX SETTINGS 8.TX STAMP

This item will not appear on the menu unless your fax machine has been provided with the stamp option.

4.Press SET.

5.Press the search buttons to display ON or OFF then press SET.

If you turn this feature ON, select one of the options described on the next page.

6.When you are ®nished, press STOP to return to standby.

TX Stamp Setup Summary

The default settings, shown in bold, remain in effect unless you change them.

ON	Turns on the stamp feature. After you set this switch ON,
	documents will be stamped according to the following settings.
	If you do not want to stamp temporarily, you can use the
	STAMP button to turn the stamp feature off.
	STAMP ACTION
	DIRECT & MEMORY TX	Stamps all documents you
		scan for direct sending or
		memory sending.
	DIRECT TX	Stamps only documents you
		scan for direct sending.
OFF	Turns off stamping documents scanned for sending. However,
	before you scan a document, you can still turn on the stamp
	feature for a document you want to stamp with STAMP button.

12-8 Other Special Features Chapter 12