Canon FAX-L800 manual Sending with the Relay Broadcast Button, 10Using a Relay Network Chapter

JPerform the procedure to register a telephone number for One-touch or Coded Speed Dialling. (Q4-6, 4-14) If the speed dialling buttons are already set up, perform the procedure to change the One-touch or Coded Speed Dialling settings. (Q4-6, 4-14)

JWhen you do the speed dialling settings, turn on the OPTIONAL SETTING feature and select TX TYPE. Select ORIG RELAY TX and then set the ITU-T subaddress and password. (Q4-11, 4-19) Con®rm that the other party is set up properly to relay documents received from your fax. Your fax can not con®rm whether or not the other fax has been set up properly for relaying a document sent from your fax.

Sending with the RELAY BROADCAST Button

RELAY BROADCAST

ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PQRS TUV WXYZ

7 8 9

0

Follow this procedure to send the original document for a relay broadcast with the RELAY BROADCAST button.

You can set only one destination.

1.Set the document on the fax. (Q6-3)

Set the document resolution, contrast, and document type. (Q6-4) You can also select a sender's name with the TTI SELECTOR. (Q6-6)

2.Open both One-touch Speed Dialling panels and press RELAY BROADCAST.

ORG RELAY TX

SELECT LOCATIONS

TEL=

3.Dial the relay units.

Use regular dialling. (Q6-7) -or-

Press a One-touch Speed Dialling button, or press CODED DIAL followed by a three-digit code. (Q4-26, 4-28)

9-10Using a Relay Network Chapter 9