Sanyo DSR - 300 manual Network SET, Making network settings, Display

5 NETWORK SET

(when optional interface board is installed)

<MAIN MENU 2> [ ] button [ ] button [ ] button

[MENU] button

[ ] button [EXIT/OSD] button

Making network settings

1 Press the [MENU] button twice.

The <MAIN MENU 2> screen appears.

2 Press the [ ] or [ ] button to select “5. NETWORK SET”, then press the [] button.

The <NETWORK SET> screen is displayed.

3 Move the cursor to “NETWORK CONTROL” and press the [ ] and [ ] buttons to set “ON”, then press the [ ] button.

(Example: ON)

[Settings] (‹ indicates default setting.)

Setting	Description
‹OFF	Prevents operation of this unit via the network to which it is
	connected.

Setting	Description
	When connected to a network, “NETWORK CONTROL” will
ON	normally be displayed on the unit’s monitor output. When
	playback is performed via the network, this will also be
(DISPLAY:	displayed on the unit’s monitor. Operation via the unit will not be
	possible while network connected.
ON)
	However, it will be possible to terminate the network connection
	by pressing and holding the [EXIT/OSD] button for at least 3
	seconds.
	When connected to a network, “NETWORK CONTROL” is not
	displayed on the unit’s monitor output. Even if playback is
ON	performed via the network, the unit’s monitor output will be
	normally displayed for monitoring. The unit’s PLAY/STOP
(DISPLAY:	indicator will not light up even during playback. (Recording will
	be possible.)
OFF)
	Operation via the unit will not be possible while network
	connected. However, it will be possible to terminate the network
	connection by pressing and holding the [EXIT/OSD] button for
	at least 3 seconds.

4 Move the cursor to “IP ADDRESS” and press the [ ] button, then press the

[ ], [ ], [], and [ ] buttons to change the setting.

(Example: 192.168.0.1)

5 Move the cursor to “SUBNET MASK” and press the [ ] button, then press the [ ], [ ], [], and [ ] buttons to change the setting.

(Example: 255.255.255.0)

English 77