Sanyo DSR - 300 manual 103, Normal REC Mode SET

2 MENU-SPECIFIC SETTINGS

(when optional interface board is installed)

6. NORMAL REC MODE SET

Set conditions for normal recording and timer recording as described below.

1

2

3

4

5

Setting the picture quality for recording

Set the picture quality for recording to the normal recording area as follows.

1 Select “PICTURE QUALITY”.

[Settings] (‹ indicates default setting.)

Setting	Description
SUPER FINE	Super Fine
FINE	Fine
‹ENHANCED	Enhanced
NORMAL	Normal
BASIC	Basic

2 Select “FRAME” or “FIELD” recording.

[Settings] (‹ indicates default setting.)

Setting	Description
‹FIELD	Sets the recording method to field. This is the
	normal recording method.
	Sets the recording method to frame. This
	method is used when the resolution of
FRAME	still-type images must be improved. Note,
	however, that this method is not suitable for
	fast-moving images as they can become
	blurred.

Setting audio recording

Audio can be recorded together with images when performing normal recording.

Note, however, that since this audio data will also be stored in the normal recording area, the recording time for this area will be reduced.

3 Select “AUDIO RECORDING”.

[Settings] (‹ indicates default setting.)

	Setting	Description
	ON	Audio will be recorded.
‹OFF		Audio will not be recorded.

zAudio recording can only be specified when the recording rate is more than A 5.00/10.00 FPS.

Setting the recording rate

Set the recording rate for normal recording as follows. (Default setting: A 5.00/10.00 FPS)

4 Select the recording rate for normal recording.

A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00, A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29, 1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31, 1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11, 0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20, 0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)

Selecting setting values

Image resolution is determined by the product of picture quality and recording rate. The higher the picture quality and the faster the recording rate, the better the image resolution; however, as higher resolution requires more storage capacity, the recording time will be reduced accordingly.

zThe recording rate will be limited between A 10.00/ 20.00 and 0.50/1.00 FPS when the setting for pre-alarm recording is “ON”.

zThe recording rate for timer recording should be set separately using the TIMER SET menu. (JP. 104)

5 Click [SAVE].

The new setting is saved.

English 103