Kohler 20-3250 kW Deton, Knock, D14 LOW, Coolant LVL, D15 Remote, AIR Damper, Idle Mode, Active

Factory-Defined Settings

				Relay					Inhibit
Status Event		Refer		Driver	Alarm			Default	Time	Time
		to		Output					Delay	Delay
or Fault		Menu	Digital Display	(RDO)	Horn	Lamp	Range Setting	Selection	(sec.)	(sec.)
Digital Aux. Input		9, 10	D12		On	Warning	Fixed	2 sec.
D12 Detonation			DETON					inhibit,
Warning ]			WARNING					0 sec. delay
Digital Aux. Input		9, 10	D13		On	Shutdown	Fixed	0 sec.
D13 Detonation			DETON					inhibit,
Sensing Module			SHUTDOWN					0 sec. delay
(DSM) Shutdown ]
Digital Aux. Input		9, 10	D13		On	Shutdown	Fixed	0 sec.
D13 Knock Detection			KNOCK					inhibit,
Module (KDM)			SHUTDOWN					0 sec. delay
Shutdown ]
Digital Aux. Input D14		9, 10	D14 LOW	RDO-19	On	Shutdown	Fixed	30 sec.
Low Coolant Level,			COOLANT LVL					inhibit,
(with LCL switch) **								5 sec. delay
Digital Aux. Input		9, 10	D15 REMOTE		On	Shutdown		0 sec.
D15 Remote			SHUTDOWN					inhibit,
Shutdown								0 sec. delay
Digital Aux. Input		9, 10
D16 Remote Reset
Digital Aux. Input		9, 10
D17 VAR/PF mode
Digital Aux. Input		9, 10
D18 Voltage Lower
Digital Aux. Input		9, 10
D19 Voltage Raise
Digital Aux. Input		9, 10	D20	RDO-23 *	On	Shutdown	Fixed	0 sec.
D20 Air Damper			AIR DAMPER	(lead 56)				inhibit,
Indicator (if used) **								0 sec. delay
Digital Aux. Input		9, 10	D21	RDO-21	Off	Warning	Fixed inhibit time	0 sec.		0--600
D21 Idle (speed)			IDLE MODE					inhibit,		or 9:99
Mode Function			ACTIVE					60 sec.		for
								delay		infinity
ECM Red Alarm		10	ECM RED		On	Shutdown
(was MDEC Red			ALARM
Alarm) [[
ECM Yellow Alarm		10	ECM YELLOW		On	Warning
(was MDEC Yellow			ALARM
Alarm) [[
EEPROM Write		10	EEPROM WRITE		On	Shutdown
Failure			FAILURE
Emergency Stop		10	EMERGENCY	RDO-14	On	Shutdown
Shutdown			STOP	(lead 48)
Engine Cooldown
(see Time Delay--)
Engine Derate Active		10	ENGINE
			DERATE
			ACTIVE
(Engine) J1939 CAN		10	J1939 CAN		On	Shutdown
Shutdown			SHUTDOWN
(ECM only)
Engine Stalled		10	ENGINE		On	Shutdown
(ECM only)			STALLED
Engine Start
(see Time Delay--)
EPS (Emergency		10	EPS	RDO-22	Off	Warning	Fixed	1% of rated
Power System)			SUPPLYING					line current
Supplying Load			LOAD
Field Overvoltage
(see D04)
*	All models, except Waukesha-powered models.					** NFPA applications
[	Non-paralleling applications					[[ DDC/MTU engine with MDEC/ADEC
]	Waukesha-powered models					]] FAA only
w	Paralleling applications

26 Section 1 Specifications and Features TP-6200 10/12