Kohler 20-3250 kW manual Displays the corrected system frequency. See Note a

Menu 7—Generator System, continued

Menu 7 Displays with Key Entries

Key
Entry	Display	Description

	SYSTEM FREQ					# HZ
PHASE								→
(see note)						YES
PHASE								→
3 PHASE DELTA							NO
PHASE								→
3 PHASE DELTA						YES
PHASE								→
3 PHASE DELTA						YES
		OR
PHASE								→
3 PHASE WYE							NO
PHASE								→
3 PHASE WYE						YES
PHASE								→
3 PHASE WYE						YES
		OR
PHASE								→
SINGLE-PHASE							NO
PHASE								→
SINGLE-PHASE						YES
PHASE								→
SINGLE-PHASE						YES
KW RATING							?
KW RATING							#
RATED CURRENT							#
LOAD SHED OUTPUT								→
?%					# KW
LOAD SHED OUTPUT								→
#%					# KW
TIME DELAY				MIN:SEC				→
			??:??
TIME DELAY				MIN:SEC				→
			##:##
LOAD SHED OUTPUT								→
#%					# KW

Displays the corrected system frequency. See NOTE A.

Displays the phase configuration selection. Note: The display sample may differ depending upon previous entries. The user-selected phase appears first, either wye, delta, or single phase.

Displays the optional phase configuration selection. When required, use the YES key to choose the delta phase configuration.

Enter YES to change the phase configuration to a delta phase configuration and press the Enter key.

Confirms the entry. See NOTE A.

Displays the optional phase configuration selection. When required, use the YES key to choose the wye phase configuration.

Enter YES to change the phase configuration to a wye phase configuration and press the Enter key.

Confirms the entry. See NOTE A.

Displays the optional phase configuration selection. When required, use the YES key to choose the single-phase configuration.

Enter YES to change the phase configuration to a single-phase configuration and press the Enter key.

Confirms the entry. See NOTE A.

Displays the generator set kW rating as entered data. When required, use the numeric keys to set the new value. Press the Enter key.

Displays the corrected system kilowatt rating.

Displays the generator set rated current as entered data. Note: This is a read-only display.

Displays the load shed output setting. When required, use the numeric keys to set the new value. Press the Enter key. See Menu 10, Output Setup for Group B User-Defined Systems Events

Displays the corrected load shed output setting.

Displays the load shed time (minutes:seconds) delay setting. When required, use the numeric keys to set the new value. Press the Enter key.

Displays the corrected load shed time (minutes:seconds) delay setting.

Returns the user to the load shed output setting.

TP-6200 10/12 Local Programming Mode On Section 2 Operation 91