Kohler Emergency Service: Emergency Stop Shutdown and DDEC 2 to DDEC 3 Conversion Kit

6.1.9Remote Emergency Stop Kit

The emergency stop kit allows immediate shutdown of the generator set from a remote location. See Figure 6-14 and Figure 6-15. If the emergency stop switch activates, the EMERGENCY STOP lamp lights and the unit shuts down. Before attempting to restart the generator set, reset the emergency stop switch (by replacing the glass piece) and reset the generator set by placing the master switch in the OFF/RESET position.

Use the single glass piece located inside the switch for replacement and order additional glass pieces as service parts. See Section 2.3.3, Emergency Stop Switch Reset Procedure. See Section 6.2, Accessory Connections, for terminal identifications.

A-222654

TP-5352-1

Figure 6-14 Emergency Stop Kit

GM16088A-A

Figure 6-15 Remote Emergency Stop Kit Connections

6.1.10 Remote Reset Feature

The remote reset switch provides generator set resetting after a fault shutdown at a remote location. See Figure 6-16 and Figure 6-17 for user-supplied switch connection.

Press and hold the switch for 2--3 seconds and release to reset the generator set controller.

REMOTE RESET SWITCH	≈
CONTACTS NORMALLY OPEN
MOMENTARY CLOSED TO
ACTIVATE
	GM16088A-A-

Figure 6-16 Remote Reset Switch Connections

Switch Rating		12 volts DC minimum, 1 amp minimum
	Wiring Recommendation
Gauge		mm (ft.)
18--20		30.5 (100)
14		153 (500)
10		305 (1000)

Figure 6-17 Switch Rating and Wiring

Recommendations

TP-6200 10/12 Section 6 Accessories 173