Kohler 20-3250 kW manual HI SHUTDOWN→ Relay DRV OUT

Menu 10—Output Setup, continued

Menu 10 Displays with Key Entries

Key
Entry	Display	Description

RELAY DRV OUT 01			Y/N
A01	LO SHUTDOWN→
RELAY DRV OUT 01			NO
A01	LO SHUTDOWN→
RELAY DRV OUT 01		YES
A01	LO SHUTDOWN→
RELAY DRV OUT 01		YES
A01	LO SHUTDOWN→

OR

RELAY DRV OUT 01					YES
A01		LO SHUTDOWN→
RELAY DRV OUT 01						NO
A01		LO SHUTDOWN→
RELAY DRV OUT 01						NO
A01		LO SHUTDOWN→
RELAY DRV OUT 01						Y/N
A01			HI SHUTDOWN→
RELAY DRV OUT 01						NO
A01			HI SHUTDOWN→
RELAY DRV OUT 01					YES
A01			HI SHUTDOWN→
RELAY DRV OUT 01					YES
A01			HI SHUTDOWN→
				OR
RELAY DRV OUT 01					YES
A01			HI SHUTDOWN→
RELAY DRV OUT 01						NO
A01			HI SHUTDOWN→
RELAY DRV OUT 01						NO
A01			HI SHUTDOWN→
RELAY DRV OUT 01						Y/N
A01				LO WARNING→
RELAY DRV OUT 01						Y/N
Axx(see Group D)						LO
WARNING→
ANALOG INPUTS							→
RELAY DRV OUT 01							→
(user defined)
	RELAY DRV OUT XX							→
	(user defined)

Indicates whether the previously user-defined analog RDO was selected (yes or no) as a low shutdown fault.

Entering YES adds the low shutdown selection to the defined analog RDO group.

Press the Enter key.

Confirms the entry.

Entering NO removes the low shutdown selection from the defined analog RDO group.

Press the Enter key.

Confirms the entry.

Indicates whether the previously user-defined analog RDO was selected (yes or no) as a high shutdown fault.

Entering YES adds the high shutdown selection to the defined analog RDO group.

Press the Enter key.

Confirms the entry.

Entering NO removes the high shutdown selection from the defined analog RDO group.

Press the Enter key.

Confirms the entry.

Returns the user to the analog RDO (analog inputs) heading. Press the Menu Down key to continue to the next selection A02--A07 (repeat as necessary).

Gives the user the option to add or delete a selection for the next analog RDO. Note: Use the A01 analog RDO setup procedure shown above for A02--A07. Go to

Returns the user to the analog inputs heading. Press the Menu Right key.

Returns the user to the RDO 01 heading.

Gives the user the option to add or delete a selection for the next RDO. Note: Use the RDO 01 setup procedure shown above for RDOs 02--31. Go to

112 Section 2 Operation Local Programming Mode On TP-6200 10/12