TP-6200 10/12182 Section 6 Accessories
6.1.1 5 Single-Relay Dry Contact Kit
The single-relay dry contact kit provides normally open
andnormally closed contacts in a form C configuration to
activate warning devices and other user- provided
accessoriesallowing remote monitoring of the generator
set. Typically, lamps, audible alarms, or other devices
signalfaults or status conditions. Connect anycontroller
fault output to the single-relay dry contact kit.
A total of three dry contact kits may connect to a single
controlleroutput. See Figure 6-30and Figure 6-31. See
Section 6.2, Accessory Connections, for terminal
identifications.
6.1.16 Ten-Relay Dry Contact Kit
Theten-relay dry contact kit provides normally open and
normally closed contacts in a form C configuration to
activate warning devices and other user-provided
accessoriesallowing remote monitoring of the generator
set. Connect any controller fault output to the ten-relay
drycontact kit. Typically,lamps, audible alarms, or other
devices signal the fault conditions.
Refer to Figure 6-32 for an internal view of the contact
kit. See Figure 6-33 for electrical connections. See
Section 6.2, Accessory Connections, for terminal
identifications.
A-273945
Figure 6-30 Single-Relay Dry Contact Kit, Typical
GM16088A-A
CONTROLLER CONNECTION KIT MOUNTED IN JUNCTION BOX
Figure 6-31 Single-Relay Dry Contact Kit Connections