Engine Displays (Menu 2)
Some engine displays are available with selected generator set engines using engine ECMs only. The controller display shows N/A (not available) for items that are unavailable. See the controller spec sheet for applicable generator set models.
Ambient Temperature displays the generator set area ambient temperature.
Charge Air Pressure displays the engine turbocharger boost air pressure.
Charge Air Temperature displays the engine turbocharger boost air temperature.
Coolant Level displays the engine coolant level.
Coolant Pressure displays the engine coolant pressure.
Coolant Temperature displays the engine coolant temperature.
Crankcase Pressure displays the engine crankcase pressure.
DC Volts displays the voltage of starting battery(ies).
Fuel Pressure displays the fuel supply pressure.
Fuel Rate displays the calculated fuel consumption rate based on fuel injector outputs.
Fuel Temperature displays the fuel supply temperature.
Oil Level displays the engine oil level as a percent of full capacity.
Oil Pressure displays the engine oil pressure.
Oil Temperature displays the engine oil temperature.
RPM (Tachometer) displays the engine speed.
Used Last Run displays the accumulated amount of fuel used since last reset by the engine DDEC reader.
Operational Record Displays (Menus 4 and 5)
The operational record displays events since last reset. See Section 2.8.4, Menu
Engine Start Countdown displays the time remaining before the next generator set startup.
Event History displays up to 100 stored system events including status, warnings, and shutdowns.
Last Start Date displays the date when the generator set last operated.
Number of Starts displays the total number of generator set startup events.
Number of Starts (Since) Last Maintenance displays the total number of generator set startup events since the last maintenance date.
Operating Days (Since) Last Maintenance displays the total number of days of operation since the last maintenance date. A counted day of operation can be
Run Time displays the total loaded hours, total unloaded hours, and total kW hours.
Run Time Since Maintenance displays the total loaded hours, total unloaded hours, and total kW hours.
Time Delay Displays (Menu 8)
The time delays are user adjustable. See Section 2.8.8, Menu
Crank On/Crank Pause displays the time allocated for generator set crank on and crank pause in minutes:seconds.
Engine Cooldown displays the time delay for engine cooldown while the master switch is in the AUTO or RUN positions and not in the idle mode.
Engine Start displays the time delay before the generator set starts while the master switch is in AUTO or RUN positions.
Overcrank Shutdown (Number of) Crank Cycles displays the number of unsuccessful crank cycles (crank on/crank pause) before the generator set shuts down on an overcrank fault.
Overvoltage displays the time delay before the generator set shuts down because of an overvoltage condition.
Starting Aid displays the engine starting aid activation time.
Undervoltage displays the time delay before the generator set shuts down because of an undervoltage condition.
Section 1 Specifications and Features 19 |
