Kohler 20-3250 kW manual GEN L3 Amps Calib REF

Menu 12—Calibration, continued

Menu 12 Displays with Key Entries (Scale AC Analog Inputs)

Key
Entry	Display	Description

GEN L3 AMPS	#
CALIB REF	?.?

AND

GEN L3 AMPS	#
CALIB REF	?.?
GEN L3 AMPS	#
CALIB REF	#
GEN AMPS
LOAD VOLTAGE LN
LOAD L1--L0 V	#
CALIB REF (PARALLEL)	?.?

AND

GEN L1-L0 V	#
CALIB REF	?.?
GEN L1-L0 V	#
CALIB REF	#
LOAD L3--L0 V	#
CALIB REF (PARALLEL)	?.?

	AND
GEN L3-L0 V		#
CALIB REF		?.?
GEN L3-L0 V		#
CALIB REF		#
LOAD VOLTAGE LN
RESTORE DEFAULTS?				Y/N
RESTORE DEFAULTS?			YES
RESTORE DEFAULTS?				Y/N
GEN VOLTAGE LN

Three-Phase Models only. Measure the generator set output current for three-phase models at L3 using an AC ammeter and enter the result using the numeric keys. Press the Menu Right → key prior to entering the decimal value.

Use the numeric keys to enter the decimal value. Press the Enter key.

Confirms the entry.

Returns the user to the generator set amps heading.

Displays the load voltage line-to-neutral voltage heading.

Note: The generator sets must be running for the following steps.

Paralleling Applications. Measure the load voltage between L1-L0 using a voltmeter and enter the result using the numeric keys. Press the Menu Right → key prior to entering the decimal value.

Use the numeric keys to enter the decimal value. Press the Enter key.

Confirms the entry.

Note: The generator sets must be running for the following steps.

Paralleling Applications. Measure the load voltage for three-phase models between L3-L0 using a voltmeter and enter the result using the numeric keys. Press the Menu Right → key prior to entering the decimal value.

Use the numeric keys to enter the decimal value. Press the Enter key.

Confirms the entry.

Returns the user to the load voltage line-to-neutral voltage heading.

Displays the restore defaults selection.

When required, enter YES to activate the restore calibration defaults setting. Press the Enter key. Note: Entering Yes will delete all of the previously entered voltage and current data based on system voltage and kW and restore the calibration default settings.

Confirms the entry.

Returns the user to the generator set voltage line-to-neutral heading.

TP-6200 10/12 Local Programming Mode On Section 2 Operation 123