TP-6200 10/1266 Section 2 Operation
2.7.11 Menu 11—VoltageRegulator
Menu 11displays setup of the voltage regulator functions
including line-to-line voltages, underfrequency unloading
(volts per Hz), reactive droop, power factor, and kVAR
adjustments.
Theuser must enable the programming mode to edit the
display.
See Section 2.8.11 to make changes in this menu.
Note: The individual line-to-line voltages are displayed
for review purposes only.
Note: Voltage regulator gain is used for adjusting
voltage stability and/or response.
Note: Utility gain is used for VAR or PF stability adjust
while paralleling to a utility.
MENU 11
VOLTAGEREGULATOR
AVG L-L V # →
VOLTADJ ?.?
UNDER FREQ UNLOAD →
ENABLED Y/N
REACTIVE DROOP →
ENABLED Y/N
VARCONTROL →
ENABLED Y/N
PF CONTROL →
ENABLED Y/N
L1-L2 VOLTS →
#
FREQUENCY #HZ→
SETPOINT ?.? HZ
.8 PF RATEDLOAD →
VOLTAGEDROOP ?.?%
TOTAL K VAR # →
KVARADJ ?.?
AVERAGEPF # →
PF ADJ ?.?
L2-L3 VOLTS(3 PHASE) →
#
SLOPE →
?.? VOLTS-PER-CYCLE

Menu 11 Overview

L3-L1 VOLTS(3 PHASE) →
#
GENERATING/ Y/N→
ABSORBING Y/N
LAGGING/ Y/N→
LEADING Y/N
REGULATORGAIN ADJ
GAIN #
UTILITY GAIN ADJUST
GAIN #
ANALOG VOLTAGEADJUST
ENABLED Y/N
RESET REGULATOR
DEFAULTS? Y/N