TP-6200 10/12 63Section2 Operation
MENU9
INPUTSETUP
SETUPDIGITAL →
AUXILIARYINPUTS
DIGITALINPUT 01 →
(USERDEFINED DESC)
Pressthe down arrow to
scrollthrough additional
DIGITALauxiliary inputs
1--21or enter the input
number.
TOANALOG INPUT
SETUP(NEXT)
DIGITALINPUT 01 →
ENABLED YES/NO
DIGITALINPUT 01 →
INHIBITTIME ?:??
Menu 9 Overview
DIGITALINPUT 01 →
DELAYTIME ?:??
DIGITALINPUT 01 →
(seeGroup A) YES/NO
GroupA
The preprogrammed
selections include the
following list. See
Appendix E for
application and
restrictions with specific
engines.
WARNING Y/N
SHUTDOWN TYPE A Y/N
SHUTDOWN TYPE B Y/N
VOLTAGERAISE Y/N
VOLTAGELOWER Y/N
GroupA, continued
VARPF MODE Y/N
REMOTE SHUTDOWN Y/N
REMOTE RESET Y/N
AIR DAMPER Y/N
LOW FUEL Y/N
FIELD OVERVOLTAGE Y/N
IDLE MODE ACTIVE Y/N
BATTLESWITCH Y/N
GROUND FAULT Y/N
BATCHGR FAULT Y/N
HIGH OIL TEMP Y/N
GroupA, continued
LOW COOLANT LEVEL Y/N
LOW COOLANT TEMP Y/N
BREAKER CLOSED Y/N
ENABLE SYNCH Y/N
AFM SHUTDOWN Y/N
KNOCK SHUTDOWN Y/N
DETON WARNING Y/N
DETON SHUTDOWN Y/N
LOW FUEL SHUTDOWN Y/N
SETUPANALOG →
AUXILIARYINPUTS
ANALOGINPUT XX →
(USERDEFINED DESC)
TODIGITAL INPUT
SETUP(PREVIOUS)
ANALOGINPUT XX →
WARNINGENABLED Y/N
ANALOGINPUT XX →
SHUTDOWNENABLED Y/N
ANALOGINPUT XX →
INHIBITTIME ?:??
ANALOGINPUT XX →
WARNDELAY TIME ?:??
ANALOGINPUT XX →
HIWARN VALUE ??
ANALOGINPUT XX →
HISDWN VALUE ??
ANALOGINPUT XX →
SDWNDELAY TIME ?:??
ANALOGINPUT XX →
LOWARN VALUE ??
ANALOGINPUT XX →
LOSDWN VALUE ??

Note: For ECM engines, auxiliary analog inputs

A01--A07will appear.

Note: For non-ECM engines, auxiliary analog inputs

A03--A07will appear.

Note: For Waukesha engines, auxiliary analog inputs

A05--A07will appear.